Hoyt vintage pro hunter recurve @58" 50# (last $ reduction)

Last price reduction, then it goes to the kids if no buyer. Vintage Hoyt Pro Hunter recurve @ 58" & 50# draw weight at about a 28+" draw length, (right hand) in nice condition, has some very minor scratch's and a small amount of very minor horizontal crazing which is not uncommon, (check pictures to see all surfaces and enlarge them to your satisfaction)  test shot well on 1/20/23 with new bow string of 55" length made of 16 count Dacron from the 60x company. This has been a prized possession that has been taken care of with very light usage, selling it because I have a take-down bow with change-able limbs.  Ships in a  protective stained and varnish sealed reusable heavy duty wooden box made just for it, which is also good for long term storage or further shipping. (a 60" recurve should also fit in this box)  Nock point about 1/2" high for three split finger grip, brace height measurement about 7 1/4"  on untwisted string. I've used  400-500 spine arrows with it. Original rest is ok.  It has a beautiful lamination and came with a very glossy finish, I very carefully reduced the gloss somewhat by light use of 0000 steel wool and then 1500-2000 grit sand paper. I bought this bow about 46 years ago, its never been left outside.  Own a part of Hoyt archery history from the around the mid 70's.  (btw, the wooden box is made from 1x4" pine for sides with pegboard on top and bottom that are all wood screwed together for strength.  Please contact me with any questions.  I have reduced the price somewhat and will probably not go no any lower, (being the box alone is worth about $40 in materials and labor) I wish shipping was lower but it gets higher all the time. (does not include blue T-square) Ships bubble wrapped same or next day.  (on site pickup possible via Pricetronic posts)

Returns Not Accepted